Select a Location
It’s flooring—and then some. Made for More.
Install With Confidence
Interface offers a variety of options for installing our resilient flooring. Look below for product-specific floor prep and installation products, as well as installation instructions and videos.
Installation Instructions
:c634x763)
Luxury Vinyl Tile
XL Adhesive 2000 Plus
An acrylic adhesive with extremely aggressive tack, XL Adhesive 2000 Plus is formulated to provide high shear and peel strength. This high solid adhesive is non-staining and contains Interface’s proprietary preservative, Intersept™, for enhanced resistance to mold and mildew and to protect the adhesive from bacterial and fungal growth.
Spread Rate: 1/16" x 1/32" x 1/32" U notch trowel with an application rate of 220 - 260 sq ft per gallon
XL HM99 Adhesive
A high-strength, high-tack adhesive for installing over porous substrates, XL HM99 High Moisture Adhesive offers extended open time, fast dry time and ease of application. This unique adhesive has outstanding water resistance and tenacious bond strength for demanding installations such as hospitals, schools, nursing homes, hospitality, and food preparation centers. The low odor is ideal for occupied buildings.
Spread Rate: 1/16” x 1/32”x 1/32” U-Notch with an application rate of 220- 260 sq ft per gallon
XL 3800 Hard-Set Adhesive
Interface Criterion LVT installs with XL 3800, a firm-setting, acrylic adhesive that forms a permanent bond. XL 3800 offers better workability for the installer with extended open time up to 30 minutes. It is excellent for use on installations that require resistance to indentations from heavy point and rolling loads. XL 3800 is also very low odor, easy to spread and contains a preservative to improve mold and fungal resistance.
Spread Rates:
Over porous floors: 1/16” x 1/16” x 1/16” SQ-Notch with an application rate of 160 - 180 sq ft per gallon
Over non-porous floors: 1/16” x 1/32” x 1/32” U-Notch with an application rate of 220 - 260 sq ft per gallon
RH95 Moisture Vapor Reduction
TriSeal Adhesive Residue Encapsulator
RH95 Moisture Vapor Reduction
RH95 is approved for use EXCLUSIVELY on Interface flooring installations. RH95 is an aqueous acrylic polymer that dries to a clear film that is alkali and water-resistant. It designed for use on interior porous concrete substrates as a penetrating and film-forming polymer to protect Interface flooring installations against moisture readings up to 95% in-situ Relative Humidity (RH), moisture vapor emission rate up to 10 lbs., and pH of 11.0. RH95 is designed and warranted for use only on Interface approved flooring installations.
Spread Rate: 3/8” nap roller with an application rate of 350 - 400 sq ft per gallon
TriSeal Adhesive Residue Encapsulator
TriSeal is a light-colored, high-strength acrylic polymer compound formulated to isolate old cutback and other adhesive residues that would discolor or affect the bond of the new flooring installation. Prior to the installation of floor covering systems, TriSeal provides a clean surface for better adhesive bonds. Black asphalt-based cutback adhesive is highly reactive with vinyl back flooring and must be completely removed until there are no remaining trowel ridges or continuous film. TriSeal can be used to isolate the remaining permanent stain after the cutback has been removed.
Spread Rate: 3/8” nap roller with an application rate of 315 – 360 sq ft per gallon
RH95 Moisture Vapor Reduction
RH95 is approved for use EXCLUSIVELY on Interface flooring installations. RH95 is an aqueous acrylic polymer that dries to a clear film that is alkali and water-resistant. It designed for use on interior porous concrete substrates as a penetrating and film-forming polymer to protect Interface flooring installations against moisture readings up to 95% in-situ Relative Humidity (RH), moisture vapor emission rate up to 10 lbs., and pH of 11.0. RH95 is designed and warranted for use only on Interface approved flooring installations.
Spread Rate: 3/8” nap roller with an application rate of 350 - 400 sq ft per gallon
TriSeal Adhesive Residue Encapsulator
TriSeal is a light-colored, high-strength acrylic polymer compound formulated to isolate old cutback and other adhesive residues that would discolor or affect the bond of the new flooring installation. Prior to the installation of floor covering systems, TriSeal provides a clean surface for better adhesive bonds. Black asphalt-based cutback adhesive is highly reactive with vinyl back flooring and must be completely removed until there are no remaining trowel ridges or continuous film. TriSeal can be used to isolate the remaining permanent stain after the cutback has been removed.
Spread Rate: 3/8” nap roller with an application rate of 315 – 360 sq ft per gallon
Technical Information
Quick access to maintenance and warranty details
